Ametek B/W Controls 8040MD-G-L1-N4 Moisture Detector for Submersible Pump Motors

Special Price $358.15 Regular Price $377.00
In stock
SKU
BW-8040MDGL1N4

The 8040MD is a conductance actuated control for detection of moisture in the oil chamber of a submersible pump motor. It is used as a warning device to indicate a seal leakage and to signal the need for preventative maintenance.

  • Detects moisture intrusion in submersible pump motors
  • 110-120VAC supply voltage
  • 2 N.O. contacts
  • 1 N.C. contact

The 8040MD is a conductance actuated control for detection of moisture in the oil chamber of a submersible pump motor. It is used as a warning device to indicate a seal leakage and to signal the need for preventative maintenance.

Normally the oil surrounding the probes in a submersible pump motor is non-conductive. When moisture leaks past a compromised outer seal and into the oil reservoir of a running motor, the conductivity of the oil will change. This will trigger the 8040MD to change the state of the load contacts from their initial normally open or normally closed position.

  • Detects moisture intrusion in submersible pump motors
  • 110-120VAC supply voltage
  • 2 N.O. contacts
  • 1 N.C. contact
  • Contacts rated 25A at 120V or 240VAC
  • NEMA 4 enclosure

For more information, please see the 8040MD installation and operating instructions.

More Information
SKU BW-8040MDGL1N4
Manufacturer Ametek
Manufacturer Part Number 8040MD-G-L1-N4
Write Your Own Review
You're reviewing:Ametek B/W Controls 8040MD-G-L1-N4 Moisture Detector for Submersible Pump Motors
Nelson Northwest Alaska • 2115 SW 152nd St. • Seattle, WA 98166 • 800-726-1884
© 2017 Nelson Northwest Alaska. All Rights Reserved.