Ametek B/W Controls 8040MD Series Moisture Detector for Submersible Pump Motors

As low as $439.00
In stock
Only %1 left
SKU
BW-8040MD

The 8040MD is a conductance actuated control for detection of moisture in the oil chamber of a submersible pump motor. It is used as a warning device to indicate a seal leakage and to signal the need for preventative maintenance.

The 8040MD is a conductance actuated control for detection of moisture in the oil chamber of a submersible pump motor. It is used as a warning device to indicate a seal leakage and to signal the need for preventative maintenance.

Normally the oil surrounding the probes in a submersible pump motor is non-conductive. When moisture leaks past a compromised outer seal and into the oil reservoir of a running motor, the conductivity of the oil will change. This will trigger the 8040MD to change the state of the load contacts from their initial normally open or normally closed position.

  • Detects moisture intrusion in submersible pump motors
  • Contacts rated 25A at 120V or 240VAC

For more information, please see the 8040MD installation and operating instructions.

More Information
SKU BW-8040MD
Line Voltage L1 (110-120 VAC)
NEMA Rating 1
Manufacturer Ametek
Manufacturer Part Number 8040MD
Country of Manufacture United States
Write Your Own Review
You're reviewing:Ametek B/W Controls 8040MD Series Moisture Detector for Submersible Pump Motors
Nelson Northwest Alaska • 2115 SW 152nd St. • Seattle, WA 98166 • 800-726-1884
Search engine powered by ElasticSuite © 2024 Nelson Northwest Alaska. All Rights Reserved.